Department of Biomedical Engineering National Taiwan University

1. Tissue Engineering
2. Bioceramics
3. Nanoparticle
4. Nerve-guiding channel
5. surface modification of the materials

1. Confocal Microscope*
2. X-ray Diffractometer*
3. Atomic Force Microscope*
4. Fourier Transform Infrared Spectroscopy*
5. Real-Time PCR*
6. ELIZA reader
7. Freezer Dryer

1. Tissue engineering
2. Biocompatible materials
3. Biomedical polymer
4. Polymeric membranes

1. FT-IR Spectrophotometer*
2. FT-Raman Spectrophotometer*
3. (HPLC)*
4. Freeze Dryer
5. fluorescence microscopy

1. Tissue engineering
2. Drug delivery systems
3. Biocompactable materials applications and developments
4. BioMEMS applications
5. Diagnostic reagents developments

1. UV/Vis Spectrometer
2. Laminar flow hood
3. Chemical hood
4. Fluorescence Microscopy
5. Incubator
6. Autoclave
7. Refrigerated Cabinet
8. Analytical Balance
9. Speedvac Concentration System
10. Centrifuge
11. ELISA Reader
12. Ultrasonic Cleaner
13. FL Spectrometer
14. Freeze Dryer
15. Laser Engraving Machine

1. Joint and ligament mechanics
2. Upper limb and lower limb biomechanics
3. Joint replacement design, analysis and evaluation
4. Gait analysis theory and clinical applications
5. Integration of medical images and computer graphics assisted motion analysis
6. Computer assisted surgical planning, simulation and analysis
7. Rehabilitation exercises research
8. Development and research on rehabilitation devices
9. Acupuncture therapy of traditional chinese medicine biomedical research
10. Movement analysis of normal temporomandibular joint

Hardware

1. Motion capture system (Vicon 512 with 7 Ultra-high frequency infrared rays cameras)
2. Forceplates (AMTI, Mass., U.S.A.)
3. RS Foot Scan system
4. Magnetic tracking device (Flock of Birds)
5. ElectromagneticTracking Device(Polhemus)
6. Joint function simulating robot arm
7. Multi-function kinetic data acquiring treadmill
8. Muscle Strength Testing System
9. EMG(Motion Lab System)
10. Load Cell(KYOWA)
11. Data Loger(Instrunen)
12. Digital Video cameras (Panasonic)
13. Digital Video cameras (Panasonic)

1. Madymo 6.0 (TNO Automotive)
2. SD/FAST
3. Pro/Engineer+Mechanica
4. 3D Mastersuite
5. Hyper Works
6. BioMAS (Biomechanical and Motion Analysis System)
7. ADAMS

1. Disc dynamic biomechanics
2. Development of the computer assisted surgery technology

1. Axial tensile / compressive force testing apparatus
2. Creep testing apparatus
3. Bioreactor
4. Micro-image photography system
5. Diamond saw

1. Impact biomechanics
2. Spinal stability analysis

1. Hybrid Spinal stability testing apparatus
2. Continuous Impact Testing apparatus
3. X-ray

1. Internal and external fixator

1. BOSE3510 material test apparatus*
2. 3D medical imaging plateform

1. Surface plasmon resonance detection technology
2. NEMS/ MEMS biosensing technology
3. Biomedical instrument
4. Lab on-a-chip
5. Wireless biomedical sensing technology
6. Electrochemical sensing technology

1. GWC*
2. UV-visible spectrophotometer*
3. Imaging Ellipsometry and Surface Plasmon Resonance module included*
4. Two Photon Microscope*
5. Dip-Pen Nanolithography and Atomic Force Microscope*
6. Multichamber sputter machine*
7. Chemical hood
8. -200C refrigerator
9. Direct microscopy
10. Shaking incubator
11. oven
12. Etch PCB (EP9702)
13. Function /Arbitrary waveform generator.
14. Dual output Power supply
15. LV 10 channel ADC
16. SUN, HP workstation
17. Tanner MEMS
18. IAR (MSP430¡¦S) Microcontroller
19. MEMS Pro
20. 4 channel digital phosphor oscilloscope.

1. NI ELVIS Workstation, Protoboard, LabVIEW Drivers
2. LabVIEW for Win/NI-5102 (Oscilloscope)/NI-4060 (Digital Multimeter)/NI-5401 (Function Generator) Bundle
3. LabVIEW for Win/PCI-4472/Sound and Vibration Bundle
4. MXI-3 (Copper)/PXI 4-Slot Chassis/LabVIEW FDS Bundle for Academic Used
5. LabVIEW for Win/Motion Assistant/PCI-7344 (Motion Controller Board)/UMI-7764 (Universal Motion Interface)/Cable
6. LabVIEW for Win/Vision Dev Module/PCI-1409/Starter Kit
7. LabVIEW for Win/PCI-GPIB Starter Kit (Academic Only)
8. LabVIEW for Win/PCI-6036E/BNC-2110 Starter Kit (Academic Only)
9. LabVIEW for Win/PCI-6070E/CB-68LP Starter Kit (Academic Only)
10. LabVIEW for Win/PCI-6024/SC-2075 Starter Kit (Academic Only)

1. Use microcontroller to develop the portable intelligent medical electrical equipment. Such as ECG monitoring detector, EEG monitors and EMG monitoring, etc.
2. Development of radio frequency circuit-model for the application of wireless telemetry technology.
3. Design for the lecture of medical electronic and medical electronic system design.

1. 20MHz arbitrary waveform generator Wavetek 95
2. 100 MH oscilloscope / logic analyzer HP 54645D
3. LCR Meter GW
4. The development system of PIC
5. Tektronix TDS210, power supply, function generator

1. ultrasound hyperthermia and thermal surgery
2. Biomedical ultrasound
3. Biomedical physics
4. Radiation physics for medicine and biology

1. 256 Channel Ultrasound Power Amplifier System(*)
2. 4 Channel Phased Array Driver
3. Ultrasound transducer
4. Pulse generator
5. Ultrasound transmitter / receiveer
6. Microwave power meter
7. Ultrasound hydrophone
8. Position control system for ultrasound transducer
9. Data acquisition control system
10. Temperature recorder
11. Peristaltic pump
12. Constant temperature cooling circulation system
13. Microwave pulse amplifier
14. Flow controller
15. Image recorder

1. Nanobioscience
2. Drug delivery
3. Hyperthemia and PDT therapy of tumor

1. DISSOLUTION TESTER*
2. UV-Vis spectroscopy
3. HPLC and GPC Systems*
4. Endoscopic*
5. Biological Safety Cabinet*x2
6. Fume hood x2
7. Biophoton device
8. Inverted Fluorescence Microscopy*
9. Inverted Microscopy
10. CO2 incubator x3
11. Autoclave
12. -80°C Freezer
13. Veno 777 system*
14. GPC*
15. Zeta-Sizer*
16. Rotary evaporator
17. Micro Dialysis System
18. Diode Pumped Crystal Laser
19. Digital Cell Disruptor

1. Artificial Intelligence
2. Medical Image Analysis
3. Machine Learning/Deep Learning for Computer-Aided Diagnosis, Treatments, and Prognosis Prediction
4. Robotic Vision

1. High-performance Computers
2. Long-wave and Middle-wave Infrared Cameras
3. Robotic Arm
4. 3D Optical Surface Scanner

1. Hair follicle stem cells and hair follicle regeneration
2. Tissue engineering and regenerative medicine
3. Pigment regeneration
4. Intravital imaging
5. Radiation therapy and chemotherapy

1. Inverted microscopy
2. ELISA reader
3. Time-lapsed imaging system for cells and explants

1. Tissue Engineering
2. Mechanobiology
3. Functional Electrical Stimulation

1. Biological Safety Hood
2. Chemical hood
3. Tissue Culture Microscope
4. Incubator
5. Water Bath
6. Analytical Balance
7. Custom Bioreactor Systems
8. High speed Centrifuge
9. Digital Cameras
10. Cell Culture System
11. Inverted Fluorescence Microscopy System*
12. Real-time Live Cell Imaging System*
13. Plasma/UV Ozone Surface Treatment Systems
14. Multimodal Multiplate Reader

1. Biomedical wave propagation
2. Ophthalmological biomechanics
3. Biomechanical signal analysis

1. Frequency spectrum analyzer
2. Mechanical step controller (micro meter)
3. Liquid pressure gauge
4. Analog microphone
5. Anti-vibration platform
6. Digital camera
7. Tonometer (iCare)
8. Microscope

Vision: To improve cancer treatment efficacy and cancer patients’ quality of life
Mission:
1. Integrate the fields of medicine and engineering
2. Break through in cancer treatment through transdisciplinary collaborative research
3. Develop novel treatment strategies
Goal: Develop personalized cancer treatments
Projects:
1. Imaging biomarker analysis and personalized treatment for malignant gliomas
2. Local delivery system of anticancer agents
3. Imaging analysis of respiratory motion for radiotherapy
4. Next generation cancer treatment development
5. Medical physics of radiotherapy

1. AI computer
2. Optic microscope
3. Carbon dioxide cell incubator
4. Biological safety cabinet
5. Refrigerator
6. Chicken eggs incubator

Research aims: Leveraging artificial intelligence methods and multimodal imaging to improve the reconstruction and quantification of PET images.
Research topics:
1. Dementia neuroimaging
2. PET/MRI image processing
3. Medical imaging applications of artificial intelligence

1. Computer workstations
2. GPU server
3. PET imaging phantom
4. Medical image processing software

1. Teaching laboratory for biomedical engineering

1. Biosafety hood
2. Microplate reader
3. Chemical hood
4. UV box
5. Oven

1. Teaching laboratory for Electrial Circuits
2. Teaching laboratory for Micro-Electronics

1. DC Power Supply
2. Digital Multimeter
3. Function Generator
4. Digital Storage Oscilloscope

1. Statics: analysis and synthesis
2. S Dynamics: translation and rotations
3. S Impact testing and analysis

1. Moment of inertia experiment
2. Gyroscope (rotational direction instrument)
3. Force balance table
4. Free fall experiment
5. Kater's reversible pendulum
6. Impact tester